€1,661.48
METOD kitchen, white Maximera/Bodbyn off-white, 240x60x228 cm
Ikea METOD - Kitchen, white Maximera/Bodbyn off-white,240x60x228 cm
Product Details

Just right if you want a small kitchen with all necessary basic functions and storage. As fast and easy to buy as to start using, since we’ve combined everything into a ready-made solution.

Key Features

  • MAXIMERA drawer is a smooth-running, full-extension drawer with built-in dampers so that it closes slowly, softly and quietly.
  • You can customise spacing as you need, because the shelves are adjustable.
  • Snap-on hinges can be mounted on the door without screws, and you can easily remove the door for cleaning.
  • Sturdy frame construction, 18 mm thick.
Care Instructions
  • Drawer front, door and plinth: Wipe dry with a clean cloth. Wipe clean with a microfiber cloth dampened in water, for more difficult stains use a mild cleaning detergent and rub carefully with circular motions.
  • Base cb f built-in appliances/sink, base cabinet and other parts: Wipe dry with a clean cloth. Wipe clean with a soft cloth dampened in water and a mild non-abrasive washing-up detergent or soap, if necessary.
  • Single-lever kitchen mixer tap: Do not use scouring-powder, steel wool, hard or sharp tools which can scratch the surface. Wipe clean with a soft cloth dampened in water and a mild washing-up detergent or soap, if necessary. Wipe dry with a clean cloth.
  • Single-bowl inset sink: Wipe clean with a cloth dampened in a mild cleaner. Wipe dry with a clean cloth. Always wipe and rub the sink along the steel grain when cleaning. Do not use scouring powder, steel wool, hard or sharp tools which can scratch the surface of the washbasin.
Good to Know

Sold separately

  • Appliances are sold separately.
  • Suspension rail sold separately.
  • Use VARIERA cover caps to cover unused drill holes, sold separately.

Purchase-/Other information

  • The material in this product may be recyclable. Please check the recycling rules in your community and if recycling facilities exist in your area.
  • Even though laminate is a durable material you should never place hot pots or pans directly on the worktop without a trivet or pot stand.
  • Spare parts are available to prolong the life of your product. For more information, contact IKEA Customer Services at your IKEA store or IKEA.com.

Safety information

  • Supporting legs are required when an overhang exceeds 25 cm. The maximum distance between these legs should not be more than 80 cm.

Test results and compliance

  • Tested and certified according to relevant mechanical, quality and safety standards.
  • This product bears the CE mark.
  • Approved for outdoor use.
  • This tap is for use on high pressure water systems. Tested to work with a max. pressure of 10 bar (1000 kPa). Recommended working pressure range is 1.0 – 5.0 bar (100 kPa – 500 kPa).

Warning

  • WARNING! Falling hazard – to reduce the risk of this product falling down, it must be securely anchored. Use suitable screws and plugs for your home. If you are uncertain, seek professional advice.

Included

  • A tool is included that makes it easy to install the mixer tap in place.
  • Reinforcement rail included; increases stability with use of sink or hob.

Compl. assembly information

  • Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.
  • If you are uncertain about the installation, contact a professional. The installation shall be made in accordance with valid local building and plumbing regulations.
  • The installation shall be made in accordance with valid local building and plumbing regulations. If you are uncertain about the installation, contact a professional.

May be completed

  • May be completed with BODBYN decorative strips in off-white.
  • May be completed with FÖRBÄTTRA cover panels and plinths in off-white.
  • May be completed with MAXIMERA add-on glass sides to keep things in place, inside the drawer. The glass allows you to see the drawer content from the side (e.g. in a high cabinet).
  • May be completed with MAXIMERA divider to keep the things you are storing organised and to prevent them from sliding around.
  • May be completed with sink accessories for effective use of space on the sink.
  • May be completed with UTRUSTA interior fittings for efficient utilisation of the space.
  • May be completed with VARIERA interior fittings for efficient utilisation of the space
  • To be completed with METOD suspension rail for mounting the cabinet to the wall.

Other information

  • IKEA of Sweden AB SE-343 81 Älmhult, IKEA.com
Measurements

Width: 240 cm System, depth: 60 cm Height: 228 cm

Assembly
Specifications, packages and assembly
White
  • Colour white
  • Material Wood (including board)
  • Appearance Solid colour
  • Type Line shaped
  • Front With frame
Dimensions Width: 240 cm System, depth: 60 cm Height: 228 cm
Weight 268.89 kg
Number of Packages 52
Assembly Required Yes
Assembly Time 370 minutes

Materials

Fibreboard, Polyester paint, Acrylic paint
Thermoplastic elastomer, Polypropylene plastic, Plastic foil
Frame:
Particleboard, Melamine foil, Plastic edging
Back:
Fibreboard, Acrylic paint
Front rail:
Steel, Epoxy/polyester powder coating
Frame:
Particleboard, Melamine foil, Plastic edging
Back:
Fibreboard, Acrylic paint
Particleboard, Melamine foil, Plastic edging
Drawer side/ Drawer back:
Steel, Epoxy/polyester powder coating
Drawer bottom:
Particleboard, Melamine foil, Melamine foil
Runners:
Galvanized steel
Drawer rail:
Steel, Pigmented epoxy/polyester powder coating
Bumpers:
ABS plastic, Oil
Galvanized steel
Body:
Brass, Zinc, Chrome-plated
Spout:
Brass, Chrome-plated
Basematerial:
Stainless steel
Foam:
Polyurethane plastic
Tubes/ Cleaning plug:
Polypropylene plastic
Strainer/ Strainer basket:
Stainless steel
Seals:
Synthetic rubber, Synthetic rubber
Particleboard, Laminate, Plastic edging, Unbleached paper
Block:
Polyamide plastic (min. 20% recycled)
Inside leg/ Leg:
Polystyrene plastic (min. 20% recycled)
Clip:
Polypropylene plastic (min. 20% recycled)
Polypropylene plastic
Basematerial:
Polypropylene plastic
Insert:
Brass
Steel, Nickel-plated